New products, new developments
News
RGB NIR lens for 8k line camera
Sill launches first RGB-NIR lens for 8k line scan camera.
News
F-theta lens for battery production
S4LFT3350-292 was developed as part of the Next-Gen-3D-Bat project. The research focused on the production of modern lithium-ion batteries with…
News
F-theta lens for the photovoltaic sector
The energy transition presents us with global challenges. Renewable energies such as photovoltaics are of central importance here.
News
Scan Lenses for Stereolithography
Scan Lenses for additive manufacturing.
News
New telephoto lenses for process observation
During process observation within VIS spectrum, chromatical aberrations occur caused by the difference in laser and observation wavelength.
News
New high power usableversion of the S4LFT0163/126
The thermal focus shift is typically a problem caused by optical glass lenses.
News
Telecentric scan lenses with 48 mm focal length
In general the rule in optics is that a large image sided NA means a small minimum spot size. So steeply focused, diffraction limited beams result in…
News
Zoom beam expander for high power lasers
Sill Optics presents the new zoom beam expander S6EXZ0940-574 which is suitable for high power UV lasers at 355 nm.
News
Optimization of UV lenses
UV lasers become increasingly popular among various domains in the laser industry.
News
New lens series with coaxial illumination
Magnifying telecentric lenses occupy an intermediate position between macro lenses and microscope lenses.
News
SWIR lenses with high resolution
To enable higher resolution for industry cameras, smaller pixels or larger sensor sizes are required.
News
Bitelecentric lenses for highest requirements
Larger sensors, smaller pixels get more and more popular in the industrial machine vision, e.g. the IMX series of Sony with sensor sizes of 1.1” and…
News
Telecentric lenses for large sensor size
Manufacturer of cameras offer larger sensor sizes with smaller pixels to achieve higher resolutions following the trend.
News
Optics for 420 nm - 480 nm
Since new generations of blue diode lasers with sufficient beam quality are commercially available, efficient processing of non-ferrous metals or…
News
Industrial 3D printing – Additive manufacturing
3D printing or rather additive manufacturing is the layer by layer building of components from fine powder.